DESCRIPTION
Salient Features :
- This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped panels. The Edge Banding is a semi-automatic machine for curvilinear work piece, wherein the predefined length of PVC/ABS to be glued to the laminate can be set for repetitive work piece and the digital temp.
- Pneumatic cutting device for pre-defined length, with foot switch.
- Electronic digital millimeter counter to adjust the length
- Glue roller apply glue on board & tape for perfect bonding
- German gearbox for smooth & power drive with long life synthetics lubrication.
- Easy regulation of variable speed 4 to 12 m/min
- Revolving edge coil holder plate 525 mm. Ø
- Automatic lowering of the glue temperature after a temporary non-use of the machine
- Hard chrome steel rollers to support & guide the work piece
- Working table with specially designed hylum surface for heat insulation & frictionless movement of work piece
- Tilting working table from 0° to 45° with height adjustment up to 3 mm
- Electronic digital temp. controller with safety circuit, which allows to start the drive motor only when the hot glue has reached the set temperature
Product Video
SPECIFICATION
| Model No | Unit | J-3000.in |
| Table size (L x B) | mm | 1150 x 900 |
| Minimum work piece length | mm | 280 |
| work piece thickness range | mm | 10 - 50 |
| Edge Banding Thickness for PVC & ABS in coil form | mm | 0.4 - 2.0 |
| Min-Radius for curved Edging | mm | 20 |
| Glue pot capacity | kg | 3 |
| Feed speed | m/min | 4 to 12 |
| Front table adjustment (Up & Down) | mm | 3 |
| Front table tilt angle | degree | 0° to 45° |
| Maximum setting temperature | °C | 180° |
| Compressed air requirement | hp/kg/cm2 | 0.5 / 5 - 7 |
| Heating element | kw | 1.5 |
| Electric motor | kw | 0.37 (415V, 3ø) |
| Power supply | voltage / ø | 415V , 3ø |
| Total Power | hp | 2.5 |
| Machine dimension (L x B x H) | mm | 1850 x 1000 x 1040 |
| Approx. net weight | kg | 280 |
